Two-Component Bitumen-Rubber Waterproofing Coating
Product code 3833
Solvent-free, crack-bridging two-part bitumen-rubber waterproofing for foundations and wet areas.
A two-part, bitumen-rubber brush-on waterproofing. It contains no solvents, stays flexible and bridges cracks. Applied as a thick coat, it keeps water and damp out of reinforced concrete above and below ground. It also goes under screeds in wet rooms and on balconies, and can bond lightweight insulation panels.
Technical data
- Appearance
- Dark brown (paste consistency)
- Packaging
- 22 kg plastic bucket + 8 kg powder
- Consumption
- Average 3.5-4 kg/m² in 2 coats; exact consumption depends on the porosity of the surface
- Density
- 0,99 ± 0,05 kg/L
- Pot life
- 120 minutes
- Drying time
- Curing 10-12 hours; drying 3 days
- Other
- Solids content (A+B) 66%; pH 8.6 – 9.6; viscosity 90 dPa·s